🚚 Always free shipping across Europe 4.9/5 on Trustpilot 30 days free trial — Full refund
★★★★★ 4.9 · 22.000+ tevreden bazen
KennisbankContactTrack & trace

Blog

How to Clean a Cat Water Fountain: The Complete Guide

Drinkfontein kat schoonmaken: zo doe je het goed
Jeremy Palsma, founder Prime AnimalZ

Jeremy Palsma

Founder, Prime AnimalZ

July 14, 2026 · 8 min read

Quick answer

Clean your cat's water fountain at three levels: a 30-second daily rinse, weekly pump and filter cleaning, and a full monthly disassembly with descaling. Never use soap, dish soap, or bleach — cats taste the residue and will drink less as a result.

  • Daily: empty and rinse with cold water (30 sec)
  • Weekly: disassemble pump, rinse filter, scrub interior walls (5 min)
  • Monthly: full disassembly, descale with vinegar, replace filter (15 min)
  • Never use: soap, dish soap, or bleach
  • Replace filter every 2–4 weeks depending on water hardness

A cat water fountain encourages your cat to drink more — but only if the water is clean. A dirty fountain won’t attract any cat. In fact, a fountain with biofilm or limescale buildup is worse than a plain water bowl. This article covers exactly how to clean a cat water fountain, how often, and what you should absolutely avoid using.

Why use a cat water fountain?

Cats are naturally low drinkers. In the wild, they got most of their moisture from prey: a mouse or bird is 65–80% water. An indoor cat on dry kibble gets none of that hydration and must actively drink to compensate. The problem: most cats simply don’t drink enough from a regular still-water bowl.

Cats have an instinct to avoid stagnant water. In nature, still water was almost always contaminated or old — moving water was fresh and safe. A water fountain mimics exactly that movement: cats are naturally drawn to the flow and the soft sound of the pump. The result: they drink more often and in larger amounts. Curious about how much water a cat actually needs daily? Read: how much water does a cat need per day.

  • Cats drink on average 70% more from a fountain than from a regular water bowl
  • Filtered water: hair, dust, and limescale are continuously captured by the activated carbon filter
  • Quiet pump: the D600A runs nearly silent — ideal for shy or anxious cats
  • Always fresh: water stays in motion, significantly slowing bacterial growth
  • Wireless: no power cord on the floor, place it anywhere in your home

The health benefits are real: more hydration protects the kidneys, reduces the risk of UTIs, and keeps the urinary tract healthy. Kidney and urinary problems are the most common chronic conditions in cats, especially from age 7 onward. A water fountain isn’t just an accessory — it’s an active investment in a longer, healthier life for your cat.

Why a clean water fountain matters so much

Water that sits still or circulates for days attracts bacteria. Within 24 hours, a thin layer of biofilm forms — that slimy coating you feel when you run a finger along the inside of the reservoir. Cats smell this even when you can’t see it. The result: they drink less, or stop using the fountain entirely.

Drinking less increases the risk of kidney disease, bladder infections, and urinary tract problems — the most common health issues in cats over 7. A clean fountain isn’t a luxury; it’s prevention.

A clean fountain also directly affects how attractive your cat finds the drinking station. Fresh, filtered water tastes different from water that’s been recycling for three days. Cats notice immediately and will start preferring a dripping tap or a puddle outside over their own fountain. Regular cleaning keeps the fountain appealing and your cat properly hydrated.

💧

Biofilm is invisible — but cats always smell it.

After just 24 hours without rinsing, biofilm starts forming on the inner walls of the fountain. Your cat notices before you do. A daily rinse takes 30 seconds and prevents weeks of drinking refusal.

How often should you clean a cat water fountain?

There are three maintenance levels, each with a different frequency:

Frequency What you do Time
Daily Empty the bowl and rinse with cold water 30 sec
Weekly Disassemble pump, rinse filter, scrub interior 5 min
Monthly Full disassembly, descale, replace filter 15 min

How to clean a cat water fountain: step by step

Here is the complete cleaning routine for the D600A fountain — applicable to most other models as well.

1

Unplug — always first

Unplug the fountain before touching anything. The D600A runs on USB — disconnect the cable. This protects the pump and is simply safe practice.

2

Disassemble: separate the reservoir, filter, and pump

Remove the filter and set it aside. Take out the pump (on the D600A, it unscrews from the bottom). You now have three separate parts: reservoir, filter, and pump.

3

Rinse the reservoir with cold water

Rinse the reservoir thoroughly with cold tap water. Use a soft brush or cloth to scrub the inner walls and remove biofilm. No soap, no dish soap.

4

Clean the pump (weekly)

Open the pump and rinse all parts under running water. Use the small cleaning brush included with the fountain or filter pack to remove limescale and debris from the moving parts. An old toothbrush works great too. Let the pump dry completely before reassembling.

5

Descale (monthly)

Mix a solution of 1 part white vinegar to 3 parts water. Fill the reservoir, let it sit for 30 minutes, pour it out, and rinse thoroughly three times with clean water. Limescale disappears without any harsh chemicals.

What should you never use to clean a cat fountain?

Many people make the mistake of using the same dish-cleaning products on their cat’s fountain. That approach doesn’t work here: residues stay trapped in the filter and pump, and your cat tastes them immediately.

🚫

These must never go in a cat water fountain.

Soap and dish soap: leftover residue ruins the taste and your cat will drink less. Bleach or chlorine: toxic to cats and damages the filter. Boiling water: warps plastic and ruins pump seals. Always use cold or lukewarm water.

Using white vinegar for descaling is absolutely fine — just make sure to rinse three times with clean water afterward. Vinegar residue tastes unpleasant to cats, even though it isn’t toxic.

When does the filter need replacing?

Filters are consumables. They trap hair, dust, and limescale, but eventually become saturated and stop filtering effectively. Signs that your filter needs changing:

  • The filter has changed color (dark brown or grey)
  • The water has a different smell or taste
  • The pump’s water flow is noticeably weaker
  • The filter is more than 4 weeks old (hard water: 2 weeks)

Replace the D600A filter every 2 to 4 weeks depending on water hardness in your area. In areas with hard tap water, 2 weeks is a sensible target. Want more detail on when and how to replace the filter? Read: cat water fountain filter replacement: when and how.

Our fountain: designed to be easy to clean

The D600A was built with maintenance in mind: the reservoir is wide enough to fit your hand inside, the pump disassembles without tools, and the filter swaps out in 10 seconds.

Prime AnimalZ water fountain D600A black 2.8L

WIRELESS · SILENT PUMP

D600A Black

2.8L · Wireless · Carbon filter

View product
Prime AnimalZ water fountain D600A white 2.8L

WIRELESS · SILENT PUMP

D600A White

2.8L · Wireless · Carbon filter

View product

Frequently asked questions

Can you put the water fountain in the dishwasher?

The D600A reservoir can go on the top rack of the dishwasher. The pump and filter must never go in the dishwasher: the heat damages the seals and filter media. Always check the manual for your specific model.

How long does a filter last?

On average 2 to 4 weeks. Many areas have relatively hard water, which means filters get saturated faster. Watch for filter color (dark = saturated), flow rate (weaker than usual), and any odd smell. If multiple cats share the same fountain, replace it sooner.

My cat stopped drinking from the fountain — now what?

Nine times out of ten, it’s a cleaning issue. Clean the fountain thoroughly, replace the filter, and refill with fresh water. Cats are very sensitive to smell and taste and will stop drinking the moment they detect anything unusual. Also try moving the fountain to a different spot — some cats prefer not to drink right next to their food bowl.

How do I know if I’m not cleaning it enough?

Four signs: your cat is drinking less or avoiding the fountain, you can feel a slippery or slimy coating on the inner walls (biofilm), the water has a musty or slightly sour smell, or there are visible limescale deposits on the outside of the reservoir. If you notice any of these, clean the fountain immediately and replace the filter.

Summary

Cleaning a cat water fountain takes 30 seconds a day and 5 minutes a week. That’s all it takes to keep the water clean, fresh, and appealing for your cat. Skip the soap, dish soap, and bleach — cold water and white vinegar are all you need. Replace the filter every 2 to 4 weeks.

Want to optimize your litter setup too? Check out our self-cleaning litter boxes: automatic, compact, and designed for multi-cat households.

Prime AnimalZ automatic pet feeder

Pair it with an automatic cat feeder

A water fountain and an automatic feeder together create a fully automated feeding station. Your cat eats and drinks on a schedule — even when you’re away.

Browse automatic feeders →

Related posts.

two of 1

Jeremy Palsma Oprichter Prime AnimalZ · 9 mei 2026 · 8 min lezen Kort antwoord De beste automatische voerbak voor de meeste katten heeft app-bediening, een ingebouwde camera, batterijbackup en...

Read more